Home > Reviews > German > cyber-hobby.com 1/35 Scale Kit No. 19 (Dragon Models Limited 1/35 Scale 39-45 Series Kit No. 6398); Pz.Kpfw. IV Ausf. F1 "Vorpanzer" - Smart Kit

Pz.Kpfw. IV Ausf. F1 "Vorpanzer" - Smart Kit

Reviewed by Cookie Sewell


Stock Number and Description cyber-hobby.com 1/35 Scale Kit No. 19 (Dragon Models Limited 1/35 Scale 39-45 Series Kit No. 6398); Pz.Kpfw. IV Ausf. F1 "Vorpanzer" - Smart Kit
Scale: 1/35
Media and Contents: 793 parts (531 parts in grey styrene, 216 "Magic Track" Links, 30 etched brass, 15 clear styrene, 1 twisted steel wire)
Price: price estimated at US $45.00. Will be available online from Mission Models
Review Type: First Look
Advantages: The "other shoe" drops with a nice companion to the Ausf. F2; subtle changes in the sprues; includes parts for desert variant
Disadvantages: Probably not enough etched brass or mixed media parts to suit some modelers
Recommendation: Recommended for all German armor fans


Following closely on the heels of the excellent DML Pzkw. IV Ausf. F2 "Smart Kit" is this effort from cyber-hobby.com which provides a "boutique" version of the Ausf. F1 with the short L/24 gun.

DML itself last produced a Pzkw. IV Ausf. F1 back in 1997 (1/35 Scale Imperial Series No. 9044; DAK Pzkw. IV Ausf. F1; 694 parts (574 in grey stryene, 210 in steel colored styrene, 10 photo etched)) which was a totally different kit derived from Gunze Sangyo molds. Many modelers hoped for an F1 when the new F2 kit was released in March 2007 and now cyber-hobby.com has honored their wishes.

This kit is basically the excellent F2 kit with the exception of some "sprue roulette" changes to the original kit. The kit boasts modified B, D and K sprues covering 58 parts and also has new L (the L/24 gun assembly) and T (the "Vorpanzer" applique armor array, taken from the Pzkw. IV Ausf. E "Vorpanzer" kit) parts along with two new frets of etched brass for a total of 49 new parts made just for this kit.

As I previously noted, this kit has a new hull pan which is complete less the stern plates, separate final drives, and much of the surface detail simulates screw or bolt holes; it also has an applique lower glacis plate. Drivers now consist of only four parts; the separate bolts are gone. Bogies are now nine piece affairs without separate tires.

The upper hull consists of a deck and framework with applique sides, front and rear engine intake components and fenders. The muffler has a central tube section and six add-on parts to complete it along with a "slide molded" exhaust pipe. This kit does provide both the "solid" engine deck access hatches as well as the "louvered" desert ones, which is a bit odd as only a single finishing option is provided.

All ports and hatches are separate parts so they can be posed open. While not detailed the hull does come with a rudimentary firewall for the engine compartment, and the various vents and louvers are also posable either open or closed. The bow also comes with a well-done machine gun and ball mount. Note that all ports have clear styrene inserts as well.

The turret is relatively conventional in its parts breakdown. The new version only uses the KwK L/24 gun so the options that are provided for the KwK L/43 gun go to the spares box. Other than the gun and a very well done commander's cupola of 18 parts (5 are optional) there is only a minimal interior for the turret.

Oddly enough for a cyber-hobby.com "boutique" kit this one nearly has less brass than the Ausf. F2 kit did. Etched brass is kept to a minimum and only covers items such as the engine air intake louvers, some small brackets, and the flaps for the engine air intakes on the sides of the rear deck.

Tracks are the "Magic Track" snap-together-then-cement type, and modelers are advised to recall that when facing the head card the left side track links are on the left and right are on the right; glad DML simplified that as before I needed a 10x jeweler's loupe to tell which was which!

A tiny sheet of targeted Cartograf decals is provided along with but ONE finishing options: Unidentified unit, 1942. This tank is in overall grey (the directions state "field grey" but from what I recall that was a grey-green color and not a vehicle color) with the name "Hansi" on the lower glacis plate. The model does not come in any of the DAK or other options, which considering there were more than 450 built is something of a shame. Perhaps DML is planning to release the "straight" F1 as a separate kit.

I have one work of explanation to post with this review, and that is the use of the term "Panzerbraun." I don't coin terms in German, and as a point of fact got that one several years ago from noted German armor researcher Tom Jentz. He used it to differentiate between what he called "Panzerbraun" which was the standard sand color used for German armored vehicles from the factories and "DAK Braun" which was the desert color. Having seen the one alleged pristine vehicle in DAK paint the APG Demag 1-ton halftrack captured in 1943 it is more of a "Gulden's Mustard" color than the colors I often see at shows. Thankfully in some respects this model doesn't offer either color as an option, so that is probably better for my sake!

Unlike other cyber-hobby.com kits this one has "parents" credit is given to project supervision by Hirohisa Takada, technical drawings by Shin Okada and technical assistance from Tom Cockle, Gary Edmundson, Notger Schlegtendal, and Thomas Anderson. With these gentlemen providing input I believe them when they call the vehicle "unidentified!"

Overall this appears another short-run "boutique" kit from cyber-hobby.com but hopefull DML will give it "legs" and more finishing options.

Highly Recommended.

Sprue Breakdown and Source

A 37x2 Drivers, idlers and return rollers
A 81x2 Road wheels and bogies
B 28 Turret base and details, gun breech
C 19 OVM and pioneer tools
C 8 Jack and details
D 27 Hull and turret details (desert variant)
E 27 Hull details and gun barrel
F 16 Commander's cupola
F 8 Spare track links
G 52 Turret and hull ports, smoke grenade launchers
H 57 Engine deck and details
K 3 Fenders and upper glacis plate
J 2 Hull top and turret top
J 8 Machine guns
L 19 L/24 gun and parts
L 108 "Magic Track" left side
M 15 clear styrene
R 108 "Magic Track" right side
T 20 "Vorpanzer" armor array
Y 1 Lower hull pan
Z 1 Twisted metal wire
MA 15 Etched brass
MB 15 Etched brass

Thanks to Freddie Leung for the review sample.