German WWII NOTEK Lights & Tool Sets

Eduard 1/48 scale

Reviewed by Brett Green

Summary

FirstLook

Eduard’s latest military accessory offerings are their PRINT series. These are 3d printed resin parts, sometimes with additional photo-etched enhancements.

This time we will take a look at four recent sets covering 1:48 scale German WWII headlights, tail lights and on-vehicle equipment.

Each of the sets is packed inside a clear plastic box. The resin parts are attached to the bottom of the box with double-sided tape to make sure the delicate resin parts do not rattle around and break.

The 3d printing is perfectly done for all sets. Removal and clean-up will be fast and easy.
 
Instructions are supplied.

Item No. 635048 – WWII German NOTEK Headlights

The first in this selection is a set of 12 German NOTEK headlights. These will be suitable for a wide selection of German WWII military and civil vehicles.

Each light is made up from three parts - two 3d printed and one photo-etched.

Three different styles of photo-etched mounts are included.

These will be very versatile and highly detailed replacements for 1:48 scale kit headlights.

Item No. 635045 - WWII German Hammers

This is a set of four German WWII Hammers.

Three of the four hammers are printed into clamps printed in place. A nice touch is a variation of the spacing on the clamps. One of the hammers has no clamps, making it a handy diorama accessory.

Each hammer has a photo-etched bottom mount.

These are simple accessories but the clamps really make a visible difference.

Item No. 635046 – WWII German Axes

Similar to the hammers, there are four axes in this set – three with clamps printed in place for use on vehicles and one free from any encumbrances that may be used as a general accessory off the vehicle.

Once again, handed clamps are provided.

The three on-vehicle handles each have a single clamp and a photo-etched mount on the base.

Item No. 635047 – WWII German NOTEK Rear Lights

Finally in this selection, we have a set of 18 WWII German NOTEK tail lights.

Three styles are included.

Each light is one piece each.

All of these accessories will be very useful to 1:48 scale military vehicle and diorama builders.

All Recommended

Thanks to Eduard for the samples www.eduard.com